DynaWizard 2.10 Updates and Patches =================================== This file contains information about an updated component for DynaWizard 2.10. Updated components contain fixes for issues which have been reported by customers or discovered during testing. Unless otherwise stated the updated component should be considered stable and should be used in place of the component that was provided in the DynaWizard 2.10 release package. Component ========= DynaWizard System Rebuilder 16 - Version 2.10.92 - Release Date 30/5/2006 Changes ======= Following are the list of changes made to this component since the release version. 2.10.92 - Correction of an infinite loop condition when no network adapters were configured with a valid IP address such as when a DHCP server was not available. This error caused System Rebuilder to hang indefinitely with the message "Checking Image Path" while trying to enumerate the available IP addresses. System Rebuilder will now give up after 4 DHCP retries and exit with an error to allow the boot process to continue, this will produce a delay of approximately 20 seconds which is the correct behaviour. 2.10.90 - Improvements in the handling of corrupted entries by the FAT file system driver including correction of a condition where a corrupted long file name entry could be treated as a valid short file name entry instead of being ignored as corrupted. This would most often result in the case where System Rebuilder would display random file paths on screen during the cleaning phase and would either continue cleaning these paths for a long time without ever completing the task or appear to hang with the same path displayed on screen for a long time. These improvements should allow System Rebuilder to ignore this type of file system corruption and permit Windows Chkdsk to run and repair the file system. Installation ============ To install this update do the following: - Unzip the downloaded file to a temporary directory. - Copy the file DWSYS16P.EXE contained in this update to the Files directory of your DynaWizard 2.10 installation. (Normally C:\Program Files\DynaWizard\Files) - Open your image in Image Manager and select Tools, Apply Latest Updates to Image.. from the menu. Follow the prompts to import this updated component. Software Licence ================ This software is protected by Australian copyright law and international treaties. It is licenced for use on the number of computer systems shown on the registration certificate. It may be moved from one computer to another as long as there is absolutely no possibility of it being used on more computer systems than shown on the registration certificate at the same time. If this software is used on a network, one licenced copy of the software is required for each network station using the software. If this software is an evaluation version you are permitted to use the software for the express purpose of evaluating its suitability for your needs for a time not exceeding 60 days from installation, except where specific permission for extended evaluation has been granted by the author. Limited Warranty ================ SoftOz warrants that the physical disks and physical documentation are free of defects in workmanship and materials for a period of sixty days from the date of purchase. If the disks or documentation are found to be defective within the warranty period, SoftOz will replace the defective items at no cost to you. The entire liability of this warranty is limited to replacement and shall not, under any circumstances, encompass any other damages. SoftOz specifically disclaims all other warranties, expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Trademarks ========== Windows, Windows 95, Windows 98, Windows Me, Windows NT and Windows 2000 are Trademarks of Microsoft. Netware, Intranetware and NDS are Trademarks of Novell. Linux is a Trademark of Linus Torvalds. All other Trademarks are the property of their respective owners.